www.micropowerdirect.com micropower direct 292 page street suite d stoughton, ma 02072 usa t: (781) 344-8226 f: (781) 344-8481 e: sales@micropowerdirect.com w: www.micropowerdirect.com MDCFM-02A key features: ? 0 to 80 vdc input ? compact case ? 30 db attenuation ? -40c to +85c operation ? chassis mount option ? din rail mount option ? low cost input parameter conditions min. typ. max. units input voltage range, see note 1 MDCFM-02A 0.0 40.0 vdc MDCFM-02Aw 0.0 80.0 nominal current, see note 2 1.5 a dcr 160 m general parameter conditions min. typ. max. units frequency attenuation 30 db eft en 61000-4-4 criteria b; 4 kv environmental parameter conditions min. typ. max. units operating temperature range ambient -40 +25 +85 c storage temperature range -55 +125 c cooling free air convection humidity rh, non-condensing 95 % physical case size module see mechanical drawing (page 2) chassis (a2) mount see mechanical drawing (page 2) din (a4) mount see mechanical drawing (page 2) case material non-conductive black plastic (ul94-v0) weight module 0.71 oz (20g) chassis (a2) mount 1.41 oz (40g) din (a4) mount 2.11 oz (60g) electrical speci? cations speci cations typical @ +25?, nominal input voltage & rated output current, unless otherwise noted. speci cations subject to change without notice. wide input, dc encapsulated eft suppresser module schematic: MDCFM-02A(w) typical connection the mdcfm-02 eft suppressor modules operate with many standard mpd dc/dc converters. when connected to the input, these modules will substantially improve the ems perfor- mance of the converter. when used on the output, they will substantially reduce the converter output noise and ripple. contact the factory for more information notes: 1. the max input voltage level of the dc/dc converter must be less than the maximum speci ed input of the MDCFM-02A . 2. the max input current of the dc/dc converter must be less than the maximum speci ed nominal current of the MDCFM-02A.
micropower direct we power your success - for less! 292 page street ste d stoughton, ma 02072 ? tel: (781) 344-8226 ? fax: (781) 344-8481 ? e-mail: sales@micropowerdirect.com www.micropowerdirect.com for the chassis mount option, add suf? x ?a2? to the model number (i.e. MDCFM-02A-a2) w ww.m i cropower di rect.co m www.micropowerdirect.com mechanical dimensions mechanical dimensions: with chassis mount option (a2) pin function 1-v in 2+v in 3+v out 4-v out pin con nec tions the MDCFM-02Ax is available mounted on an adapter plate for mounting to a chassis or on a din rail. mechanical dimensions for these adapters are shown at right. the photo below shows a product mounted on a similar adapter. please contact the factory for more information. mechanical dimensions: with din rail option (a4) pin function 1-v in 2 no connection 3+v in 4+v out 5-v out connection is the same for a2 & a4 pin con nec tions for the din rail mount option, add suf? x ?a4? to the model number (i.e. MDCFM-02Aw-a4) notes: all dimensions are typical in inches (mm) tolerance x.xx = ?.02 (?.50) wire range for a2 & a4 connection is 24 - 12 awg
|
